UL 2043 Fire Test for Heat and Visible Smoke Release for Discreet Products and Accessories Installed in Air Handling Spaces

Unique Features of Ruks UVGI System

• 90% Kill Rate of Bacteria and Virus, per pass

• Kill Rate up to 99% per pass is Attainable

• Scientifically Proven Design with Selection Charts to guarantee delivery of Specified or Target Kill Rate

• Selection based on Energy delivered at end of Lamp Life. Guarantees design Kill rate throughout Lamp Life

• Custom Designed to Suit Site Specific Duct Contact Lengths & Duct Air Velocity

• Detailed Scientific Selection Charts to prove Delivery of Kill Rate

• Software Version of Selection Charts available

• Rated Average Life of Lamps is 16,000 Hours, longest in the Industry

• High Energy output 800 mA Lamps. Most Competitors Lamps are 425 mA

• Factory provided Aluminum Reflective Surface for lining of Contact Ducts. Increases Reflectivity of UVC

Rays, Increases Kill Rate

• Lamps installed in frame mounted Quartz Sleeve

• Eliminates physical contact with Air Stream

• Eliminates contact of Lamp with air borne dust, contaminants, and carry over moisture from cooling coil. Protects Lamps and extends Lamp Life

• As Lamp is mounted inside Quartz Sleeve, Lamp can be changed without changing Quartz Sleeve

• Lamps with ultra low Mercury content < 10 Mg per Lamp

• Mercury spill from broken Lamp is confined to the Quartz Sleeve. Eliminates spill of mercury into the duct

• Environmentally Friendly

• Lamp does not operate at ultra low wavelength. Prevents Production of Uncontrolled and Unmodulated Ozone

• Readily visible Indicating lamp to show Lamp failure, without opening access door, or turning off power

• Option to show Ballast Failure

• Factory installed Hour Meter. LCD panel color changes to ensure timely Lamp change

• Dry Contact in Hour Meter for remote indication.

RS 485 interface to BMS, to show hours and Lamp change

• All electrical components factory installed and wired in powder coated CRS Control System, and remotely mounted

• Timely Indication of Failure. Assures Medical Staff virtually Bacteria & Virus Free Air

• Option is UV Energy Sensor and Monitor to indicate UV energy delivered in unit of μw/cm2. Interfaces to BMS

• Factory Provided Terminals to connect to AHU Motor Interlock. Prevents start of UVGI unless AHU Motor is in operation

• Factory provided Electrical cables and Quick Connector, between Control System and UVGI Frame. Eliminates field wiring

• Installs on factory provided Guide Rails and Mounting rails. Eliminates field provided Flanges. Provides near perfect installation

• Easy and quick Lamp change, without withdrawal or removal of frame from duct work, or removal of access door

• Ruks unique design eliminates duct access door. Assures total safety

• All materials for Installation, mounting rails, cables between Control System and Lamp frame, and quick electrical connector, are factory provided. Eliminates field wiring

• Easy, quick, and cost effective Installation and Maintenance

• All wetted parts are Stainless Steel. Suitable for Hospitals and Food Processing facilities

• Electronic Ballast listed to UL 935

• Electronic Ballast meets FCC standards for EMI and RFI limits. Safe to use in Hospitals and Health Care facilities

• All Parts and Components are UL Listed or UL Recognized

• No other UVGI System compares with such High Scientific Standards, Monitoring & Fault Detection Capabilities

• Electronic Ballast: UL 935 (Class P, Type HL, Type 1 Outdoor) UL, CSA

• On OFF Switch: UL 1054

• Hour Meter: UL 508

• Terminal Block Flammability Rating UL 94 V.0

• Interconnect Harness: Flammability Rating UL 94 V.0

• Quick Connect Electrical Coupling: Flammability Rating UL 94 V.0

• Lamp Holder: Valox Flammability Rating UL 94 V.0

• Thermal Bond between Glass and Frame; PTFE Non Flammable to UL 94 V.0

• Indicating lamps: E 20325

• Circuit Breaker: UL 1077

• Aluminum Reflective Surface: UL 723 5/10 Flame/Smoke (Limits Smoke and Fire Spread) US Coast Guard Approved

CERTIFICATION TO OTHER STANDARDS

Electronic Ballast

• Sound Rating A

• FCC Part 18 (Class A) for EMI and RFI Non Consumer Limits

• ANSI C62.41